KLS Martin marLED E15 - Interface Adapter and Software Update



Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E9 / E9i / E15E15
54 54 V V 1.01.0
6.186.18 Interface adapter marLEDInterface adapter marLED
®®
EE
(# 08-653-05-04)(# 08-653-05-04)

11 CoConnnnecectitionon
marLEDmarLED
®®
E9+15E9+15
22 ConConnecnectiotion n marmarLEDLED
®®
E3E3
33 ReReseset t kekeyy
44 ConConnecnectiotion tn to Xo X1111
55 SSllaavvee
66 PrProogrgramam
77 RSRRSR232 c232 connonnectection tion to PCo PC
88 RRuunn
99 MMaasstteerr
1010 PWPWR = PR = Powowerer
(Power supply OK)(Power supply OK)
1111 Rx Rx = R= Receceieiveve
1212 Tx Tx = T= Traransnsmimitt
(Send)(Send)
1313 ProPro. = Se. = Seleclector stor switwitch 6ch 6
for programfor program
Fig. Fig. 6-2: 6-2: Interface Interface AdaptersAdapters
Improper use of the interface adapter may destroy it and damage the lamp.Improper use of the interface adapter may destroy it and damage the lamp.
The interface adapter (Art. No.: 08-653-05-04) marLEDThe interface adapter (Art. No.: 08-653-05-04) marLED
®®
E is designed exclusively for theE is designed exclusively for the
marLEDmarLED
®®
E Series (E3 / E9 / E9i / E15).E Series (E3 / E9 / E9i / E15).
Use with the following products is expresslyUse with the following products is expressly
prohibitedprohibited
::
••
 Control electronics marLuxControl electronics marLux
®®

••
Master control panel marLuxMaster control panel marLux
®®

••
 marLEDmarLED
®®
RS-232 interface cardRS-232 interface card
•• Control electronics surgiCamControl electronics surgiCam
®®

NOTICENOTICE