KLS Martin marLED E15 - Software Update; Installing the Installing the C2 Prog Programming Software C2 Prog Programming Software on the on the PC PC; Connecting G the Connectin the Interface Interface Adapter Adapter



Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E15E9 / E9i / E15
V V 1.0 1.0 5555
6.196.19 Software UpdateSoftware Update
Danger of electrocution!Danger of electrocution!
The marLEDThe marLED
®®
E9 / E9i / E15 is supplied with mains voltage. Avoid contact with mains voltage!E9 / E9i / E15 is supplied with mains voltage. Avoid contact with mains voltage!
Follow the instructions below to update individual components.Follow the instructions below to update individual components.
6.19.16.19.1 Installing the C2Prog programming software on the PCInstalling the C2Prog programming software on the PC
Installation of theInstallation of the C2ProgC2Progprogramming software requires the latest Java software to beprogramming software requires the latest Java software to be
installed on your PC.installed on your PC.
The software package contains the filesThe software package contains the files
••
setup.exesetup.exe

Complete installer forComplete installer for
C2ProgC2Prog

•• targets.custom.xmltargets.custom.xml
Parameter file forParameter file for C2ProgC2Prog; must be copied manually into the proper location; must be copied manually into the proper location
Installation steps:Installation steps:
••
 Run setup.exeRun setup.exe. The program will guide you through the necessary installation steps.. The program will guide you through the necessary installation steps.
••
The program directory defaults toThe program directory defaults to C:\Programs\C2ProgC:\Programs\C2Prog. This can be accepted or changed.. This can be accepted or changed.
••
 Copy the fileCopy the file targets.custom.xmltargets.custom.xmlinto theinto the \targets\\targets\subdirectory of the programsubdirectory of the program
directory. With the default program directory, this will bedirectory. With the default program directory, this will be C:\Programs\C2Prog\targetsC:\Programs\C2Prog\targets ..
Thus the programThus the program
C2ProgC2Prog
is installed in the program directory and can be launched from there.is installed in the program directory and can be launched from there.
6.19.26.19.2 Connecting the interface adapterConnecting the interface adapter
Danger of electrocution!Danger of electrocution!
The lamp is operated at 100–240 VAC! Switch off the lamp and then unplug it, or reliably de-The lamp is operated at 100–240 VAC! Switch off the lamp and then unplug it, or reliably de-
energize it and secure it against reactivation.energize it and secure it against reactivation.
WARNINGWARNING
NOTICENOTICE
NOTICENOTICE
WARNINGWARNING