KLS Martin marLED E15 - Voltage Measurement Using the Service Plug



Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E15E9 / E9i / E15
V V 1.0 1.0 2929
4.74.7 Voltage Measurement using the Service PlugVoltage Measurement using the Service Plug
Voltage measurement requires a special “service connector”. This plug bridges certainVoltage measurement requires a special “service connector”. This plug bridges certain
functions (including safety functions such as voltage disconnection upon removal functions (including safety functions such as voltage disconnection upon removal of theof the
sensoGrip handle), thus making voltage measurement psensoGrip handle), thus making voltage measurement possible.ossible.
Fig.Fig.4-4: Service connector: order number and side view4-4: Service connector: order number and side view
Filter glass assembly
Filter glass assembly
D-Sub socket, 25-poleD-Sub socket, 25-pole
Jumpers onJumpers on
service connectorservice connector
11 BBuuttttoonnss
Fig. 4-5: Fig. 4-5: Service connector pin assignmentService connector pin assignment