KMC Controls 67 Series

11
ASSEMBLY SET-UP
GENERAL:
Most of the general set-up and assembly for your KMC Rip Strip has been performed at our factory.
Those items not installed at KMC will be reviewed later in this section. For your convenience, please
see the “Overhead Layouts” portion of this section, to ensure proper positioning for the size and con-
figuration of your KMC Rip Strip.
RIP STRIP
W/RESET ON THE GO
& FRONT COULTERS
RIP STRIP
W/RESET ON THE GO
& COVER CROP ROLLER
RIP STRIP
W/TOGGLE TRIP
& COVER CROP ROLLER
RIP STRIP
W/TOGGLE TRIP
& FRONT COULTERS