3
Serial # Tag Location
FORWARD
The KMC 6700 Series Rip Strip is a heavy-duty deep tillage tool that is capable of
breaking up the ground hardpan up to 18” deep. The unit comes equipped with Residue Cut-
ting Coulters, whether on individual Front Swivel Coulter Mounts or attached directly to a
Cover Crop Roller. Two shank versions are offered with this series product. Reset on the Go
Shanks for non-stop operation, with the ability to clear obstructions and fully reset back in the
ground without ever slowing down and Toggle Trip Shanks offering the same superior load
protection, but requiring lifting for full reset. The unit can also be equipped with a variety of
tillage tools and finishing options, providing the farmer with the ability to adapt to any field
condition while still delivering a superior level of performance.
INTRODUCTION:
TO THE PURCHASER
This KMC 6700 Series Rip Strip has been carefully designed and manufactured to
give years of dependable service. In order to operate it efficiently and maintain it properly,
please read the instructions within this manual thoroughly.
Some components of this machine are labeled left or right. The notations are determined by
standing behind the implement and facing the direction of forward travel.
After reading this Operator’s Manual, Please keep it for reference each season.
To insure procurement of the proper repair parts, please record your machine’s Model Number,
Serial Number, and Purchase Date as shown below:
Model No._______________________
Serial No.________________________
Purchase Date ___________________
To Next Page
Loading...
Need help?
General
