INSTALLATION INSTRUCTIONS
20 September 2007 – 6H4130
Selecting Intraoral and Extraoral Preferences
[1] On the Main screen, click the Info/Setup button and log in as before.
[2] Select the Setup tab.
The Setup tab appears:
Setup tab
[3] In the Plate Configuration area of the Setup tab, select the plates you want to make available to each room.
Only the plates you select will appear on the Main Screen. Each room may have either intraoral or extraoral
plates, or both. You may change the settings at any time.
Selecting plate configuration
[4] Select a room from the Configuration Set drop-down menu.
[5] Select Intraoral or Extraoral from the Image type drop-down menu.
A list of available holders appears in the holders field on the left side:
Plate configuration area
Select a room
Select an examination procedure
To Next Page
Loading...
