3-20 A-61670 August 2014
Performing a self test The scanner self test will test the image capture subsystem to ensure that it is
functioning correctly.
Count only mode You may want to count the number of documents entering the scanner without
actually scanning them.
1. Touch Count Only. The Count Only screen will be displayed.
2. Place the documents you want to count in the input elevator.
3. Press the Start/Resume button. When the scanner has scanned all
documents, the total number will be displayed.
4. Touch Cancel when finished to return to the Idle screen.
NOTES:
• When you press the Stop/Pause button, the feeder and transport will stop.
You can continue your Count only test by pressing the Start/Resume button.
• In Count only mode, Document Handling will default to Improved Stacking.
• Multifeed Detection is not enabled in Count only mode.
To Next Page
Loading...
