A-61670 August 2014 3-19
Performing a Print test The print test checks to be sure the ink jets in the optional Enhanced Printer
are working properly.
1. Touch Print Test. The Print Test screen will be displayed.
2. Place a blank sheet of paper in the input elevator.
3. Press the Start/Resume button. The document in the output tray will
display the results of the print test.
4. Remove the document from the output tray and evaluate the appearance
of the test pattern.
• If the pattern is complete, you are ready to begin.
• If the test pattern is inconsistent, verify that the ink cartridge is installed
properly, or you may need to clean the print head or change the ink
cartridge.
NOTE: Clean the print head by removing it from the printer carrier and
dabbing the print head with a damp cloth. For procedures on
removing or changing the ink cartridge, see Chapter 4, Document
Printing.
5. Touch Cancel to return to the Idle screen.
Acceptable Unacceptable: pattern
is inconsistent
To Next Page
Loading...
