TP-6461 1/08 Appendix 115
Appendix B Screen Summaries
This section lists the items shown in the View and Setup screens for quick reference.
View Screens
Main Screen
D System Status
D Next Exercise Time and Date
D Normal and Emergency Voltage
D Frequency
D Normal Source Voltage
D Lamp Test
D Emergency Source Voltage
D Current, Amps
D Time/Date
D Daylight Saving Time Info
D Preferred Source
D Source-Source Type
D Commit/No Commit to Transfer
D Standard/Programmed Transition
D Phase Rotation (3-phase only)
D In-Phase Monitoring Enabled/Disabled
Test Sequence Screens
D Enter Password
D Type of Test
d Loaded/Unloaded/Auto Load
d Auto Load Test Run Time
D Test Sequence Status Screens
d Active Time Delay with Time Remaining
d Source Voltages
d End Delay Button
d End Test Button
View Exerciser Sequence (during exercise run)
D Exerciser Active
D Source Voltages
D Time Remaining (in exercise run)
D End Exercise Button
View Event History
D Event Description
D Date and Time of event
View Maintenance Records
D Total Min Not Preferred
D Reset Min Not Preferred
D Total Min in Standby
D Reset Min in Standby
D Total Min Operation
D Reset Min Operation
D Total Transfers
D Reset Transfers
D Total Fail Transfer
D Reset Fail Transfer
D Total Loss Pref Tran
D Reset Lodd Pref Tran
D Transfer Time N>E
D Transfer Time E>N
D System Start Date
D Last Maint Date
D Last Loss Duration
D Last Loss Date/Time
View Exerciser Setup
D Exercise Event Number
D Enabled/Disabled
D Exercise Run Time
D Start Date
D Start Time
D Weekly/Biweekly
D Loaded/Unloaded
View System Setup
D Open/Programmed Transition
D Source Type: Util/Gen, Gen/Gen, Util/Util or Util/Gen/Gen
D In--Phase Monitor Enabled/Disabled
D Commit/No Commit to Transfer
D # I/O Modules Installed
D Rated Current
D 3 Src Engine Start Mode Mode1/Mode2
D Remote Test Loading Loaded/Unloaded
D Peak Shave Delay Enabled/Disabled
To Next Page
Loading...
