Kohler ZCS series User Manual

TP-5660 11/982 Specifications
1.3 Nameplate
A nameplate providing characteristic and rating
information that affects operation, installation, and
servicing is attached to the inside of the transfer switch
enclosure door. See Figure 1-3.
Copy the part number intothe blank spaces provided in
Figure 1-4 and then use Figure 1-4 to interpret the part
number.
Copy the part number, factory-installed accessory
numbers,andserialnumberfromthenameplateintothe
spaces provided in the Service Assistance section in
this manual for use when requesting service or parts.
AUTOMATIC TRANSFER SWITCH
PART NO.
SERIAL NO.
VOLTS
PHASE
HERTZ
AMPS
WIRES
POLES
TS-003
1
3
2
1. Location for part number used to identify type of ATS.
2. Location for factory-installed accessory numbers.
3. Location for the ATS serial number.
Figure 1-3. Typical Transfer Switch Nameplate

Kohler ZCS series Specifications

General

Brand	Kohler
Model	ZCS series
Category	Switch
Language	English