new 60 Series Service Manual.rev. 06.01.16.docx - 9 –
7. Make all plumbing and electrical connections to the ice machine and ice storage bin in
accordance with local regulations.
8. Remove the strap securing the bin level probe and install through the bottom of the ice
machine. Ice machines on top of other ice machines or ice crushers should have the bin
probe stuck through the bottom of the machine directly above the bin. The hole for the bin
probe will be in the same location on all variations of these machines, just to the right of the
ice-making compartment or the ice chute in GT56x applications.
9. Install the ice deflectors.
Front Deflectors:
Rear Deflectors:
To Next Page
Loading...
