76
• The use of the bottom guard will reduce the effective volume of the bin
ICE CRUSHER OPERATION
With the crusher knob in the crushed position, ice falling from the ice maker will be directed by
the selector plate through the crusher mechanism and deposited into the left side of the bin.
The crusher motor is powered through a relay which is energized by the hot gas valve circuit of
the ice maker. The selector knob must be in the crushed position to close a switch and complete
the circuit to the motor. Additionally, the front panel safety switches must be depressed (covers
on) for motor operation.
With the crusher knob in the "CUBE" position, ice falling from the ice maker will bypass the crusher
mechanism and be dumped into the right side of the bin. The crusher motor will not be energized.
To Next Page
Loading...
