Need help?Do you have a question about the Kolida K5 PLUS and is the answer not in the manual?
Procedures and notes for performing static GPS measurements with the K5 PLUS.
Step-by-step guide for setting up and operating RTK measurements using radio communication.
Guide for performing RTK measurements using GPRS network communication.
How to connect the receiver to a PC and transfer data files.
Using the INStar software for data transfer, firmware updates, and configuration.
Details the accuracy levels for static and RTK measurements of the K5 PLUS.
General| Type | GNSS Receiver |
|---|---|
| Channels | 800 |
| Frequency | L1, L2, L5 |
| Operating Temperature | -40°C to +65°C |
| Tilt Sensor | Yes |
| IMU | Yes |
| eBubble | Yes |
| Internal Memory | 8 GB |
| Battery Life | 10 hours |
| Weight | 1.2 kg |
| Signals | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Positioning Accuracy (Horizontal) | 8 mm + 1 ppm |
| Positioning Accuracy (Vertical) | 15 mm + 1 ppm |
| Data Format | RTCM, CMR, CMR+ |
| Communication | Bluetooth, Wi-Fi, 4G |
| Battery | Lithium-ion |
To Next Page