OM4064 06/11 Maintenance - Section 40
Lubrication and Service Page 40-15
1500 HOUR LUBRICATION AND MAINTENANCE CHECKS
Complete the 10, 50, 100, 250, and 500 hour lubrication and maintenance checks.
2500 HOUR LUBRICATION AND MAINTENANCE CHECKS
Complete the 10, 50, 100, 250, and 500 hour lubrication and maintenance checks.
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
1. WHEEL MOTORS - Change oil. Clean sump mag-
netic plugs. Refer to Motorized Wheel Maintenance
Schedule in Section P of the shop manual for addi-
tional information.
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
1. WHEEL MOTOR GEAR OIL - Wheel motor gear oil
must be replaced every 2500 hours of operation.
Refer to G.E. Motorized Wheel Service & Mainte-
nance manual.
2. FRONT WHEELS - Drain and refill with oil. Refer to
the Shop manual, Section G, for detailed instructions
on changing the oil. Lube key “E”.
d. NOTE: Oil may need to be changed more fre-
quently, depending on mine conditions and
the results of the oil sample tests.
To Next Page
Loading...
