Komatsu 730E - 10,000 Hour Lubrication and Maintenance Checks

OM4064 06/11 Maintenance - Section 40
Lubrication and Service Page 40-17
10,000 HOUR LUBRICATION AND MAINTENANCE CHECKS
Complete the 10, 50, 100, 250, 500, 1000, 2500, and 5000 hour lubrication and maintenance checks.
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
1. WHEEL MOTORS - Clean the area around the
grease ports to prevent dirt or other contaminates
from entering. Remove the six grease port plugs on
each wheel motor. Grease the inboard and outboard
wheel hub bearings with one 414 mL (14 oz) cartridge
per each grease port.
2. BLEED-DOWN MANIFOLD CHECK VALVE -
Replace bleed-down manifold check valve. Refer to
Bleed-Down Manifold Valve in Section L of the shop
manual for additional information.