12-42
[15] Density Shift
Density shift divides each of nine density levels into two levels of lighter and three
levels of darker when used in combination with Text/Photo Enhance.
Density shift selection can be made in each of four Text/Photo Enhance modes; Text/
Photo (general), Text, Photo, and Increase Contrast.
❒ Setting options: Density shift 0/ 1/ 2/ 3 (standard)/ 4/ 5
Procedure
1 Touch 15. Density Shift on the Key Operator Mode Screen to display the Density
Shift Setting Screen.
2 Select the Text/Photo Enhance mode.
Touch
Text/Photo, TEXT, PHOTO, or Increase contrast to highlight it, then enter the
desired density shift (from 0 to 5) using the control panel keypad.
3 Touch
OK to complete the settings and return to the Key Operator Mode Screen.
4 If no further changes are required, touch
RETURN to restore the Basic Screen to
perform copying operations.
To Next Page
Loading...
Need help?
General
