Konica Minolta 7020 - Output Mode for Machine without Finisher

3-27
This section describes the following four output modes for a copier without the Fin-
isher. The Stack mode is initially selected.
q Stack mode copies the original set in amounts determined by the print quantity
setting, then outputs the copied sets.
w E-SORT+sort mode rotates every other sorted sets by 90° upon exit, provided
the same paper size is loaded in two trays, one tray with paper loaded in portrait
orientation and the other tray with paper loaded in landscape orientation, e.g., A4
and A4R.
e Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
r E-SORT+group mode rotates every other grouped set by 90° upon exit, pro-
vided the same paper size is loaded in two trays, one tray with paper loaded in
portrait orientation and the other tray with paper loaded in landscape orientation,
e.g., A4 and A4R.
Output Mode for Machine without Finisher
3
Copying
Operations
Paper Size
Setting
Print Quantity
Positioning
Originals
2
s 1
Using
Memory
FS-107
Output Modes
Output without
Finisher
Lens Mode
Density
1s2, 2s2
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3
2
1
Example: 3 copied sets
Originals
E-SORT+groupStack
E-SORT+sort
Group
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover insertion, Booklet, OHP, Im-
age insert, Repeat, AUTO layout, Non-image area erase, Stamp (Numbering)
❒ Incompatible with E-SORT+group mode: Using platen glass (unless Chapter with Platen
store mode, Flip Side 2, Image shift, or Stamp excluding Numbering is used), Proof
copy, Sheet/Cover insertion, Booklet, OHP, Image insert, Special original (Mixed origi-
nal), Repeat, AUTO layout, Non-image area erase, Stamp (Numbering)
❒ Incompatible with E-SORT+sort mode: Sheet/Cover insertion, Booklet, OHP, Special
original (Mixed original), Repeat, AUTO layout, Non-image area erase