Konica Minolta 7216 - Loading Paper into the 2 Nd Tray

3
Basic Operations
3-6 7216/7220
Loading Paper Into the 2nd Tray
Load paper into the 3rd, 4th and 5th paper trays using the same procedure
described below.
1 Pull out the 2nd Tray.
2 Press down on the Paper-Lifting
Plate until it locks into place.
3 Load the paper into the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.
?
Have the necessary precautions
been observed when loading
the paper?
§ Do not load so much paper that
the top of the stack is higher than the
mark.
4 Slide the paper guides against the
edges of the paper.
?
Is the paper guide positioned
correctly?
§ Make sure that the paper guides
are pushed up against the
edges of the paper.
Paper-Lifting Plate