Konica Minolta 7216 - Positioning Sheet Documents on the Original Glass

Basic Operations
3
7216/7220 3-9
Positioning sheet documents on the Original Glass
For plain documents or documents that cannot be loaded into the ADF,
position them as described below.
1 Lift open the Platen Cover, or the Document Feeder if it is installed.
2 Position the document to be copied
face down on the Original Glass.
H Align the document on the
scales above and to the left of
the Original Glass.
3 Carefully close the Platen Cover, or
the ADF if it is installed.
4 If necessary, specify any other copy
settings.
H Before Making Copies (p. 5-1)
H Advanced Copy Operations (p. 6-1)
5 Press the [Start] key.