Konica Minolta 7216 - To Make Copies Using the AUTO Zoom Setting

Before Making Copies
5
7216/7220 5-23
To make copies using the “AUTO” zoom setting
1 Load the document to be copied.
H Refer to “Loading the Document” on page 3-8.
2 Press the [APS/AMS] key until the
AMS function is selected.
H Check that “AUTO” appears in
the top line of the screen.
3 Press the [Paper Size] key, and
then select the desired paper size.
4 If necessary, specify any other copy
settings.
H Copy density (p. 5-26)
H Advanced Copy Operations
(
p. 6-1)
5 Using the 10-Key Pad, enter the
desired number of copies, and then press the [Start] key.