Before Making Copies
5
7216/7220 5-9
Loading Plain Paper Into the Bypass Trays
Load the paper into the Manual Bypass one sheet at a time.
Up to 100 sheets of paper can be loaded into the MSBT. Do not load so
much paper into the MSBT that the top of the stack is higher than
the
mark.
Note
When paper other than plain paper is loaded, the paper type must be
specified.
1 Load the paper into the Bypass Tray.
?
Have the necessary precautions been observed when loading the
paper?
§ Load the paper so that the front side of the paper faces down.
§ Make sure that the paper is not curled (rolled).
2 Adjust the Bypass Tray Extender and the paper guides to fit the size
of the paper.
To Next Page