Konica Minolta 7216 - Specifying Output Function

6
Advanced Copy Operations
6-8 7216/7220
Specifying Output function
1 Load the document to be copied
into the Document Feeder.
H Refer to “Loading the
Document” on page 3-8.
2 Press the [Output] key.
The indicator for the desired Output
function lights up.
?
Are neither the “Sort” nor the
“Group” indicators lit?
§ The “Non-sort” function is
selected.
3 If necessary, specify any other copy settings.
H Before Making Copies (p. 5-1)
H Advanced Copy Operations (p. 6-1)
4 Using the 10-Key Pad, enter the desired number of copies, and then
press the [Start] key.