To select all the images in the folder to be displayed in the
slide-show presentation.
125
Slide
show
Menu options
Playback
Duration
Settings
Enter
Repeat
All frames
Marked
Frames
1 - 60s.
Yes / No
To select specific images in the folder to be displayed in the
slide-show presentation. When this setting is chosen, the
frame-selection screen (p. 118) will be displayed. Use the
left/right keys of the controller to highlight the image to be
included in the presentation. Pressing the up key will mark
the image with a check indicator. To deselect a marked
image, highlight it with the yellow border and press the down
key; the check indicator will disappear. Continue until all the
images have been edited. Press the controller to set the
marked frames, or press the menu button to cancel the oper-
ation and return to the playback menu.
To select the period each image will be displayed during the
slide show.
To start the slide-show presentation. Pressing the central
button of the controller will pause the presentation. During
the slide show, press the menu button or the down key of the
controller to stop the presentation and return to the playback-
mode menu.
Selecting “Yes” will cause the slide show to repeat until it is
canceled using the menu button or the down key of the con-
troller. “No” will end the slide show presentation and return to
the playback-mode menu when all the images have been
displayed once.
To Next Page
Loading...
Need help?
General
