27
1234
To eject a card, open the card-slot door (1), and press and release the card-eject lever
to extend it (2).
Press (3) the card-eject lever to eject the card (3). The card can now be pulled out. Take
care when removing the card as it becomes hot with use. The card-eject lever should
remain inside the camera body. If it extends, push it into the camera.
Insert a new memory card and close the card-slot door (4).
A memory card used in another camera may have to be formatted before being used. If
the unable-to-use-card message appears, the card should be formatted with the camera.
A memory card can be formatted in section 1 of the playback menu (p. 120). When a card
is formatted, all the data on the card is permanently erased. If the card-error message
appears, press the central button of the controller to close the window; check the Konica
Minolta web site for the latest compatibility information:
North America: http://www.konicaminolta.us/
Europe: http://www.konicaminoltasupport.com
To Next Page
Loading...
