Configuration Menu Overview
41
CUSTOM
SIZE
Specify the paper size when custom-sized
paper is loaded into Tray 2.
The setting units can be switched between
millimeters and inches with the
SYS
DEFAULT MENU/PAPER/UNIT OF
MEASURE
setting.
Setting range for WIDTH
For MILLIMETERS: 92 to 216 mm
(default)
– North America: 216 mm
– All other regions: 210 mm
For INCHES: 3.63 to 8.50 inches
(default)
– North America: 8.50 inches
– All other regions: 8.26 inches
Setting range for LENGTH
For MILLIMETERS: 148 to 297 mm
(default)
– North America: 279 mm
– All other regions: 297 mm
For INCHES: 5.83 to
11.69 inches
(default)
– North America: 11.00 inches
– All other regions: 11.69 inches
" This menu item appears only if
PAPER SIZE is set to CUSTOM.
PAPER
TYPE
Settings
ANY/PLAIN PAPER/
RECYCLED
Select the setting for the type of paper
loaded into Tray 2.
To Next Page
Loading...
