Configuration Menu Overview70
" All factory default values are shown in bold.
JOB
TIME-
OUT
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NET
TCP/IP ENABLE
Settings
YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IP
ADDRESS
Setting
000.000.000.000
Set the IP address for this printer on the
network.
Use the , , , and keys to
specify the value.
If the IP address is manually specified,
DHCP/BOOTP is automatically set to
OFF.
SUBNET
MASK
Setting
255.255.000.000
Specify the subnet mask for the network.
Use the , , , and keys to
specify the value.
DEFAULT
GATEWAY
Setting
000.000.000.000
Specify the IP address of the router if
one is on the network. Use the , ,
, and keys to specify the value.
DHCP
Settings
ON/OFF
Select whether or not the IP address is
automatically acquired.
If
ON is selected, the IP address is auto-
matically acquired.
If
OFF is selected, the IP address is not
automatically acquired.
To Next Page
Loading...
