135
Card Edit environment
Page 1 - Load
Loading a single bank
You can load a single bank of User data (User Pro-
grams, User Styles, Performances) with a single opera-
tion. A bank corresponds to a STYLE or PROGRAM/
PERFORMANCE button.
1. Insert the source card into the card slot.
2. Press F-1 to scan the card and show the file list.
3. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to select the “.SET” folder con-
taining the data you wish to load.
Move the folder to the first line of the display. If
the folder you are looking for is in another folder,
use the F-3 (OPEN) button to open it. Use the F-4
(CLOSE) button to go back to the parent folder.
4. Press F-3 (OPEN) to open the “.SET” folder. A list
of User data appears (Global, Performance, Pro-
gram, Style).
5. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
6. Press F-3 (OPEN) to open the selected folder. A list
of User banks appears.
7. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the desired bank to the
first line of the display.
8. Press F-2 (LOAD) to confirm the file selection. The
list of User banks in memory appears.
In the page above, the previously selected Style
bank will be loaded into the bank 1 (USER1 but-
ton) in memory. The existing Styles in memory will
be deleted and overwritten.
9. Scroll the available locations in memory, using the
E–H (Scroll) buttons (or the TEMPO/VALUE con-
trols).
10. When the target bank is selected (i.e., it is in the
first line of the display), press F-2 (LOAD) to load
the bank. The “Are you sure message” will appear.
Press ENTER to confirm, or EXIT to abort.
Warning: After confirming, all User data contained in
the bank in memory is deleted.
When the operation is completed (the “Wait” indi-
cator disappears), the source page comes back in
the display, and you may perform further loading
operations.
Loading a single item
You can load a single User item (i.e., a single User Pro-
gram, a single User Style, or a single Performance) with
a single operation.
1. Insert the source card into the card slot.
2. Press F-1 to scan the card and show the file list.
3. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to select the “.SET” folder con-
taining the item you wish to load.
Move the folder to the first line of the display. If
the folder you are looking for is in another folder,
use the F-3 (OPEN) button to open it. Use the F-4
(CLOSE) button to go back to the parent folder.
4. Press F-3 (OPEN) to open the “.SET” folder. A list
of User data appears (Global, Performance, Pro-
gram, Style).
5. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
6. Press F-3 (OPEN) to open the selected folder. A list
of User banks appears.
7. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the desired bank to the
first line of the display.
To Next Page
Loading...
