25
Basic operations
Selecting a Performance
SELECTING A PERFORMANCE
A Performance is a set of Programs and settings for the
Keyboard and Style tracks, that makes selecting com-
plex combinations live fast and easy. When the STYLE
CHANGE LED is on, a Performance can also select a
different Style.
It is always advisable to use Performances, rather than
single Programs, when playing even a solo sound,
since a Performance lets you select the right effects,
transposition, plus many other parameters, together
with the Programs.
Other “performance” parameters are saved in the
Global.
1. Press the PERFORM button. This changes the
PROGRAM/PERFORMANCE section into a Per-
formance selector.
2. Use the leftmost button of the PROGRAM/PER-
FORMANCE section to select the first row of ten
banks (1–10, upper LED turned on), or the second
row of ten banks (11–20, lower LED turned on).
3. Press one of the 1–0 buttons to select the PRO-
GRAM/PERFORMANCE bank containing the Per-
formance you are looking for.
The Performance Select window appears. There
are 8 Performances for each bank.
4. Select a Performance using the VOLUME/VALUE
(A–H) buttons.
5. If the DISPLAY HOLD LED is on, press EXIT to
exit this window.
The STYLE CHANGE button
When you select a Performance, the Style may or may
not change, depending on the status of the STYLE
CHANGE button. (When you save a Performance, the
current Style number is always memorized).
• If the STYLE CHANGE LED is on, the Style saved
in the Performance will be selected.
• If the STYLE CHANGE LED is off, the Style
doesn’t change.
SELECTING A PROGRAM
You can select a different Program (i.e., sound) to be
played by a track. Before selecting a Program, you must
select the track that you want to assign the Program to.
Note:
To assign different Programs to the Style tracks, press
TRACK SELECT to see the Style tracks. If you select a Pro-
gram while grouped tracks (Drum/Percussion or ACC) are
selected, the Program will be assigned to the last selected track.
Each Style Element (Variations, Fills…) can have dif-
ferent Programs, so your selection might be automati-
cally reset when selecting a different Element. To avoid
this reset, see “Prog (Program)” on page 49.
1. Use the VOLUME/VALUE (E–H) buttons on the
right side of the display, to select the Realtime
(Keyboard) track you wish to assign a different
Program to.
2. Press the PROGRAM button. This changes the
PROGRAM/PERFORMANCE section into a Pro-
gram selector.
Data type Parameters
Realtime
Tracks
Upper 1, Upper 2,
Upper 3, Lower
Master Transpose, Program,
Volume, Pan, Octave, Scale,
Detune, Pitch Bend,
Poly/Mono/Drum, Int/Ext,
Damper, Dynamic Range,
Joystick, C&D Effect Send
level, Type, Parameters,
Program parameters, Pads
Style
Tracks
Drum, Percussion,
Bass, Acc1, Acc2,
Acc3, Acc4, Acc5
Program, Volume, Pan,
Octave, Detune, Pitch Bend,
Poly/Mono/Drum, Int/Ext,
Wrap Around, Keyboard
Range, A&B Effect Send
level, Type, Parameters,
Program parameters,
Drum Mapping, Kick&Snare
Assignation
Global Chord Recognition Mode, Memory Mode, Velocity
Trigger, Lock
Last selected Performance
To Next Page
Loading...
