72
Song Play operating mode
The Write window
100 Even-numbered axis are totally moved
over the following odd-numbered axis.
Window
Area of quantize intervention, bordering the grid axis.
0 The quantize window corresponds to the
axis. No quantization happens.
100 The quantize window extends to the near-
est window; all events are quantized.
THE WRITE WINDOW
You can save onto the internal memory a Seq1+Seq2
Setup. There is a separate Setup for each of the two
onboard sequencers.
This Setup memorizes the Internal FX settings, the
Internal/External status of each track, and the Play/
Mute status of each track. When a new Song is selected,
the saved Setup is automatically recalled, and all
parameters are reset.
• Globally setting the Internal FX parameters allows
you, for example, to assign to all Songs a Reverb
suitable for the venue where you are performing,
without having to modify any of the Songs. (This
is true only for non-Liverpool Songs).
• Globally setting the Internal/External status allows
you, for example, to send the Piano track of all
Songs to a dedicated expander (just set globally
the Piano track to the External mode).
• The Play/Mute status allows you to globally mute
tracks that you don’t want to play during a show,
for example the melody track. (This is ture only for
non-Liverpool Songs).
For more information on the Internal FX settings for
the Song Play mode, see “Page 3 - Mixer: FX send A/B”
or “Page 3 - Mixer: FX send C/D”, and following, on
page 76.
Here is the procedure to save the Seq1+Seq2 Setup in
memory.
1. Press WRITE. The Write page appears.
2. Press ENTER to confirm, or EXIT to abort.
If you confirm, the Setup is saved into the Global.
You may then save this Setup on the card together
with the Global data.
To Next Page
Loading...
