134
Card Edit environment
Menu
MENU
From any page, press MENU to open the Card Edit
menu. This menu gives access to the various Card Edit
pages.
When in this menu, select a section using the VOL-
UME/VALUE buttons, press PAGE+ to select a page, or
press EXIT to exit the menu.
When in any page, press EXIT to go back to the current
operating mode.
PAGE 1 - LOAD
In this page you can load files from a card to the inter-
nal memory.
Press SD CARD and use the MENU button to reach this
page.
Loading all the User data
You can load all the User data (Performances, User Pro-
grams, User Styles, Global) with a single operation.
1. Insert the source card into the card slot.
2. Press F-1 to scan the card and show the file list.
3. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to select the “.SET” folder con-
taining the data you wish to load.
Move the folder to the first line of the display. If
the folder you are looking for is in another folder,
use the F-3 (OPEN) button to open it. Use the F-4
(CLOSE) button to go back to the parent folder.
4. Press F-2 (LOAD) to confirm the selection. The
“Are you sure?” message appears. Press ENTER to
confirm, or EXIT to abort.
When the operation is completed (the “Wait” indi-
cator disappears), the source page comes back in
the display, and you may perform further loading
operations.
Note: Data loaded from card, and data already in mem-
ory is merged. For example, if there is data in all three
USER Style banks in memory (USER01, USER02,
USER03), and there is only the USER01 Style bank on
the card, the USER01 bank is overwritten, while
USER02 and USER03 banks are left unchanged.
As a result, you will have a STYLE folder in memory
containing the USER01 bank you just loaded, and the
old USER02 and USER03 banks.
Loading all data of a specified type
You can load all User data of a specified type (User Pro-
grams, User Styles, Performances) with a single opera-
tion.
1. Insert the source card into the card slot.
2. Press F-1 to scan the card and show the file list.
3. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to select the “.SET” folder con-
taining the data you wish to load.
Move the folder to the first line of the display. If
the folder you are looking for is in another folder,
use the F-3 (OPEN) button to open it. Use the F-4
(CLOSE) button to go back to the parent folder.
4. Press F-3 (OPEN) to open the “.SET” folder. A list
of User data appears (Performance, Program,
Style, Global).
5. Use the E–H (Scroll) buttons (or the TEMPO/
VALUE controls) to move the data type you are
looking for to the first line of the display.
6. Press F-2 (LOAD) to confirm your selection. The
“Are you sure?” message will appear. Press
ENTER to confirm, or EXIT to abort.
When the operation is completed (the “Wait” indi-
cator disappears), the source page comes back in
the display, and you may perform further loading
operations.
Note: Data loaded from card, and data already in mem-
ory are merged. For example, if there is data in all three
USER Style banks in memory (USER01, USER02,
USER03), and there is only the USER01 Style bank on
the card, the USER01 bank is overwritten, while
USER02 and USER03 banks are left unchanged.
As a result, you will have a STYLE folder in memory
containing the USER01 bank you just loaded, and the
old USER02 and USER03 banks.
To Next Page
Loading...
