46
Style Play operating mode
Page 14 - Track: Mode
Vibrato RateSpeed of the Vibrato.
Vibrato Depth
Intensity of the Vibrato.
Vibrato Delay
Delay time before the Vibrato begins, after
the sound starts.
Drum tracks
When a track is set in Drum Mode (like the Drum and
Percussion tracks), you can adjust the volume for each
of the Drum and Percussion categories.
Kick V Kick drums volume.
Snare V Snare drums volume.
Tom V Toms volume.
HiHat V Hi-Hat volume.
CymbalV Ride, Crash and other cymbals volume.
Percus1V “Classic” percussion set volume.
Percus2V “Ethnic” percussion set volume.
SFX V Special effects volume.
Reset
You can reset the parameters’ value by keeping the
SHIFT button pressed, while pressing one of the selected
track VOLUME/VALUE buttons. After you press the
above button combination, the Reset window appears:
Press ENTER/YES to reset the currently selected track.
Keep SHIFT pressed, and press ENTER/YES, to reset all
tracks. Press EXIT/NO to abort and keep all parameters
unchanged.
PAGE 14 - TRACK: MODE
This page lets you set the polyphony mode for each
track.
Parameters
Drum This is a Drum/Percussion track. No Mas-
ter or Octave Transpose applies to this
track. You can set a different volume for
each class of percussive instruments (see
“Page 13 - Track: Easy edit” on page 45).
Poly Tracks of this kind are polyphonic, i.e.
they can play more than one note at the
same time.
Mono Tracks of this kind are monophonic, i.e.
each new note stops the previous note.
Mono Right A Mono track, but with priority assigned
to the rightmost (highest) note.
To Next Page
Loading...
