237
Error messages & Troubleshooting
Error messages
23. ERROR MESSAGES & TROUBLESHOOTING
ERROR MESSAGES
Your Liverpool can communicate with you using vari-
ous messages. Here is the list of these messages.
Messages can be of two different types:
• Waiting for your confirmation (Yes – No). Press
ENTER/YES to go on, EXIT/NO to stop.
• Revealing an error or failure. Press any button on
the front panel.
General
Another Command Is Running (Press Exit)
You can’t execute a command until the one that is run-
ning is completed.
Are you sure? (Enter/Exit)
This is a confirmation request before many operations.
Press ENTER/YES to confirm, EXIT/NO to abort.
Generic error
Some undefined error has happened.
Record Aborted
There is not enough memory to enter the Style Record,
Song Record, or Backing Sequencer Record mode.
Style Play
Corrupted Style Perform. – Save It Again
The Style Performance was damaged. Press WRITE,
and select the Current Style option, to save it to mem-
ory again.
Style Select Fails
Liverpool was not able to complete the operation.
Style Record
Arranger is Running! (Press Exit)
While in Style Record mode, this message may appear
when you try to select a different track, or execute an
edit operation, while the Arranger is running.
Low memory!
The space in the SSD (the space where User Styles are
stored) is going low. Exit Record, then load some banks
of smaller Styles before entering Record again.
Style Copy Failed (Press Exit)
Liverpool was not able to complete the Copy operation.
Style Delete Failed (Press Exit)
Liverpool was not able to complete the Delete opera-
tion.
Style Save Failed (Press Exit)
Liverpool was not able to complete the Save operation.
Style Select Failed (Press Exit)
Liverpool was not able to complete the selection.
SMF Import Failed! (Press Exit)
There was an error while reading the Standard MIDI
File with the Import SMF function. The file may be cor-
rupted.
Backing Sequence Mode
Too Many Styles! (Press Exit)
You have recorded the maximum number of Styles
allowed (depending on the memory, 10 to 15 Style
changes).
Song Play
Cannot Load JBX File to Seq 2 (Press Exit)
You can’t load a Jukebox (JBX) file to Sequencer 2. Juke-
box files can only be loaded to Sequencer 1.
Juke Box List Empty! (Press Exit)
You are trying to start playing back a Jukebox list, but
the list is empty. Please add some Songs to the list.
Juke Box List Full! (Press Exit)
A Jukebox list may contain up to 127 Songs. You were
trying to add one Song more.
Save Song List: Insert Card and Press Enter
You are saving a list of Songs. Please insert a card and
press ENTER.
Save JBX List: Insert Card and Press Enter
You are saving a list of Songs as a JBX file. Please insert
a card and press ENTER.
Wait Please
You were trying to load a file, while Liverpool is still
loading another one.
Song
Too Many Events
You have tried to copy too many events on the same
tick.
Out of Memory!
The memory limit for a Song (300KB) has been reached.
Incompatible Meter
You were trying to copy a track on a track with a differ-
ent meter.
Sequencer is Running! (Press Exit)
While in Song Record mode, this message may appear
when you try to select a different track, or execute an
edit operation, while the Sequencer is running.
Song Play and Song mode
Cannot load Jukebox file on Seq.2
You can load a Jukebox file only on Sequencer 1.
Damaged Standard Midi File
The Standard MIDI File you are trying to load is dam-
aged, and cannot be played back.
Jukebox list is empty
You tried to delete a Song in an empty Jukebox list, or
to save an empty Jukebox list.
Jukebox list is full
The Jukebox list already contains 127 Songs.
To Next Page
Loading...
