16
VOLUME While you are in the main pages of any
operating mode, select a track and use
these buttons to change the track’s vol-
ume. Use the left button to decrease it, or
the right button to increase it.
MUTE Press both buttons in a pair to mute the
corresponding track. Press both buttons
again to unmute the track.
SOLO While in the Style Play, Song Play
and Song modes, you can solo one of the
tracks. Just keep the SHIFT button
pressed, and press both of the VOLUME/
VALUE buttons corresponding with the
track you wish to solo.
To exit the solo mode, keep the SHIFT but-
ton pressed again, and press both the
VOLUME/VALUE buttons corresponding
to the soloed track.
VALUE Use each button pair to change the corre-
sponding parameter’s value. The left but-
ton decreases the value, the right button
increases it.
31 TRACK SELECT
Depending on the operating mode, this button
switches between the various tracks view.
STYLE PLAY MODE
Switches between the Realtime tracks and
the Style tracks.
SONG PLAY MODE
Switches between the main page (showing
the Realtime/Keyboard tracks), Song
tracks 1–8, and Song tracks 9–16.
SONG MODE
Switches between the main page, Song
tracks 1–8 and Song tracks 9–16.
The TRACK SELECT LED shows the current page
view:
Off Main page (Realtime tracks, or Song con-
trols)
On 2nd page (Style tracks, or Song tracks 1–8)
Flashing 3rd page (Song tracks 9–16)
32 SINGLE TOUCH SETTING
(F-1–F-4 FUNCTION KEYS) buttons
While in the main page of the Style Play or Backing
Sequence mode, these buttons select a Single Touch
Setting each. Each of the Styles includes a maximum of
four Single Touch Settings (STS), to automatically con-
figure the Realtime tracks and effects at the touch of a
finger. When the SINGLE TOUCH LED is lit, an STS is
automatically selected when selecting a Style.
In Edit mode, these buttons double as function keys,
to select the corresponding items in the display.
33 SHIFT
With this button held down, pressing certain other but-
tons will access to a second function.
34 TEMPO/VALUE section
The DIAL and the DOWN/- and UP/+ buttons can be
used to control the Tempo, assign a different value to
the selected parameter in the display or scroll a list of
files in the Song Select and Card pages. The VALUE
LED shows the status of this section.
DIAL Turn the dial clockwise to increase the
value or tempo. Turn it counter-clockwise
to decrease the value or tempo.
When used while pressing the
SHIFT button, this control always acts as a
Tempo control.
DOWN/- and UP/+
DOWN/- decreases the value or tempo;
UP/+ increases the value or tempo.
Keep the SHIFT button pressed
down, and press either the DOWN/- or
UP/+ button to reset the Tempo to the
value that’s saved onto the selected Style.
35 VALUE LED
This LED shows the status of the DIAL and DOWN/-
and UP/+ buttons.
ON The DIAL and DOWN/- and UP/+ buttons
act as Value controls, to change the value
of the selected parameter in the display.
OFF The DIAL and DOWN/- and UP/+ buttons
control the Tempo.
36 EXIT/NO
Use this button to perform various actions, leaving
from the current status:
• exit a dialog box
• answer “No” to any question that appears in the
display
• exit the Menu window
• go back to the main page of the current operating
mode
• exit the Global or Card Edit environment, and go
back to the main page of the current operating
mode
• exit from a Style, Performance or Program Select
window
37 ENTER/YES
Use this button to perform various actions, agreeing
the current selected status:
• answer “Yes” to any question that appears in the
display
• confirm a command
38 DISPLAY HOLD
This button turns the Display Hold function on or off.
ON When you open a temporary window (like
the Program Select window), it remains in
the display until you press EXIT/NO, or
an operating mode button.
OFF Any temporary window closes after a cer-
tain time, or after selecting an item in the
window.
To Next Page
Loading...
