Korg M1R

F 6-1 PANPOT
*
*
COMB! 104 PRNPOT
8 8:2 c 3:7 8
Tl=E.Bass
C C+D D
A B C D E F G H
. .... tiiiiiiii8 .... tiiiiiiii8 --- --- tiiiiiiii8 4iiiimiit
~
Timbre 1
A, (9:1 to 1:9),
Sets the output
B, C, C+D, and D.
destination of each
Timbre
00
Timbre 2 A, (9:1to1:9),
B, C, C+D, and D.
@]
Timbre 3 A, (9:1to1 :9),
B, C, C+D, and
D.
@]
Timbre4 A, (9: 1 to 1 :9),
B, C, C+D, and D.
00
Timbre 5 A, (9 :1 to 1:9),
B, C, C+D, and
D. ·
0
Timbre6 A, (9 :1 to 1:9),
B, C, C+D, and
D.
@]
Timbre 7 A, (9: 1 to 1 :9),
B, C, C+D, and
D.
IBJ
Timbre 8
A, (9 : 1 to 1 :9),
B, C, C+D, and D.
Timbre Pan assigns the output of each Timbre to outputs A through D. The selection is as follows: A,
A:B (9: 1 to 1
:9), B, C, C + D, and D.
When the Drum Kit Program is selected, the display shows "SND" and the Panpot setting in the
GLOBAL Mode is operative .
F 7 - 1 MIDI PROG CHG (MIDI Program Change)
*
COMB! !04 MIDI PROG CHG Tl=E.Bass
~NR DIS ENR ENR DIS DIS DIS ENR
~
Timbre 1
DIS/ENA
Determines whether or
not each Timbre receives
A B C D E F G H
------------------
00
Timbre 2 DIS/ENA
MIDI program change
messages.
(Timbres set
@]
Timbre 3 DIS/ENA
to "DIS" do not receive
program
change
@]
Timbre4
DIS/ENA
messages.)
00
Timbre 5
DIS/ENA
0
Timbre 6 DIS/ENA
@]
Timbre 7 DIS/ENA
IBJ
Timbre 8 DIS/ENA
A Timbre for which MIDI PROG CHG (MIDI Program Change) is set to DIS does not change its
Program when MIDI program change messages are received.
NOTE: When receiving program change messages over the Global Channel, Combination changes are
executed regardless of the setting made here.
77