Korg M1R User Manual

*
*
*
*
*
A prompt for confirmation appears when data already exists in the destination pattern.
The copy function cannot be executed when the time signature of the song and the pattern differ.
The copy function cannot be executed when there are patterns in the specified source range.
When there is a tied note lying between the inside and outside of the specified range, it is copied after
deletion of the tie.
Edits which cannot be executed on the pattern (quantization, for example) can be accomplished by
copying the pattern to an empty track, editing it there, then copying it back to the original track.
F 6-5 PATTERN COPY/BOUNCE
PRTTERN COPY/BOUNCE
C ~OPY ) P00 --+ P00
[E:=<EC]
A B C 0 E F G H
- - tiiiiiiiiit tiiiiiiiiit - tiiiiiiiiit tiiiiiiiiit ---
~
COPY /BOUNCE
Selection
of the function (copy or bounce)
COPY
Copying from pattern to pattern
BOUNCE
Bouncing from pattern
to pattern
@JP
Source Pattern 0-99 Pattern to be copied (bounced)
[]] p
Dest. Pattern 0-99 Destination pattern to be copied (bounced)
@)
[EXEC]
Executing the copy or bounce
This function copies and bounces the play data from pattern to pattern.
* Copying or bouncing cannot be executed when the time signatures or the lengths of the source and
destination patterns are different.
Pattern Copy
Copies from pattern to pattern.
1. Specify the source pattern ( [Q ) and destination pattern ( ~ ).
2.
Copy by pressing the [EXEC]( [QI ) key.
Pattern Bounce
This function combines the play data of two patterns into one pattern.
1. Set the source pattern (for bouncing) ( [Q ) and the destination pattern (for bouncing) ( ~ ).
2.
Bounce by pressing the [EXEC] ( [QI ) key.
*
As opposed to the track bounce function, the pattern which was specified as a source is not erased.
102

Korg M1R Specifications

General

Type	Synthesizer Module
Polyphony	16 voices
Sequencer	No
MIDI	Yes
Multitimbral	8 parts
ROM	4MB
Keyboard	No
Year Released	1988
Waveforms	PCM
Outputs	4 Individual Outputs
Memory	100
Filters	Digital
Number of Effects	33