Korg M1R - Multi Channel Recording

F 0 - 3 MULTI CHANNEL RECORDING
SOt-lGC1
REC REC
MULTI CH REC Track 1
PLRY PLRY PLRY PLRY PLRY PLRY
A 8 C 0 E F C H
------tiiiiiiiiiit-
~
Track 1
PLAY/REC
Setting the track to be recorded to "REC."
00
Track2 PLAY/REC
@]
Track 3
PLAY/REC
@] Track4
PLAY/REC
00
Tracks PLAY/REC
0
Track6
PLAY/REC
@]
Track7 PLAY/REC
ffil
Track 8 PLAY/REC
The MlR's sequencer can also record MIDI data from other external sequencers . The data which matches the
MIDI channel of the current track is normally recorded, but also it is possible to record MIDI data on several
corresponding tracks at the same time by using the multi-channel recording function. (See F 0 - 1, PLAY/REAL
TIME RECORDING for controlling recording parameters when using external MIDI devices.)
I. Set the track to MULTI in F 0-1 PLAY /REC.
2. Select this page by pressing the PAGE + key twice and set the track ( 1 through 8) to be recorded to REC.
3.
Select the MIDI Channel page by pressing the PAGE+ key and set the MIDI channel of each track to be
recorded to different channel numbers.
4. Record by using F 0-1 PLAY /REC.
Before recording in multi-channel recording, remaining memory is divided equally among the tracks to be
recorded. As a result, there may be a concentration of MIDI data in each track, and the memory space may be
filled up before using up all the available total memory. It is best to record tracks in the order of the amount
of data they will contain. In other words , first record tracks that will have little data, and record tracks with
much data later.
*
*
*
Punch-in recording is also possible i"n the multi-channel recording function .
All the tracks are played during playback.
MIDI messages that can be be recorded are: note on/off, pitch bend, program change, channel pressure
and control change (0 to 101).
85