Creating songs (SEQUENCER mode)
110
Other notes about SEQUENCER mode
NAUTILUS sequencer file formats
The NAUTILUS sequencer supports both the internal
NAUTILUS Song format, and Standard MIDI Files.
If you like, you can convert data between the two formats,
simply by loading the data in one format and then saving it
in the other.
For more information, see “Save to Standard MIDI File” on
page 723 of the PG, and “Save SEQ” on page 721 of the PG.
NAUTILUS Song format
This is the native NAUTILUS sequencer format, which is
required to ensure that all NAUTILUS-specific data is saved
correctly.
Standard MIDI Files
You can also load and save Standard MIDI Files (SMF), for
compatibility with other sequencers. Note that some
NAUTILUS-specific data may not be maintained when in
SMF files.
GM, XG, and GS System Exclusive Data
The NAUTILUS sequencer can record System Exclusive
messages, including XG or GS data. For more information,
see “System Exclusive events supported
in Sequencer mode” on page 557 of the PG.
Note that GM, XG, and GS exclusive messages do not
affect the NAUTILUS when they are played back.
To Next Page
Loading...
