Set Lists
120
Setting the Slot’s color
You can assign each Slot to one of 16 different colors, to
make it easier to distinguish between them quickly. You can
also apply a color to a range of Slots at once. To do so:
1. Press the Color button to bring up the color selection
dialog box.
2. Choose a color for the Slot.
If you like, you can also select a range of Slots, and apply
a color to all of them at once.
3. When you’re done, press OK.
Saving your edits
Once you’ve made a Set List, you’ll want to save your work.
To do so:
1. Select the Write Set List command from the page
menu, at the upper right-hand corner of the screen.
This brings up a dialog box which allows you to save the
Set List. Optionally, you can also select a new location, or
change the Set List’s name.
2. Press the Set List name to bring up the text edit
dialog.
You can give the Set List a descriptive name using the
on-screen keyboard.
3. After entering the name, press OK.
The text edit window will disappear, returning you to the
main Write dialog.
4. Under “To” at the bottom of the dialog, press the
popup button next to Set List to bring up the save
location dialog.
5. Select a location to save the edited Set List.
6. After selecting the location, press OK.
7. Press OK again to start the write process.
8. If you’re sure you want to write to this location, press
OK again.
After that, you’re done!
Editing a Slot’s Program, Combination, or
Song
When you’re in a rehearsal or sound-check, you may need to
make quick edits to a sound in the Set List.
With this in mind, you can:
• Jump to the editing pages for the selected Program,
Combination, or Song
• Make the desired edits
• Save the edits
• Return easily to the original Set List page
To do so:
1. Select the desired item in the Set List.
Next, from any of the Set List pages:
2a.In the menu, select the Edit [Type] command.
The actual name of the command will be either Edit
Program, Edit Combination, or Edit Song, depending
on the selected Slot.
or:
2b.Hold the front-panel ENTER button, and touch the
Slot’s button.
The mode will change to PROGRAM, COMBINATION,
or SEQUENCER as appropriate, and the system will
display the Home page for the selected item.
The Set List settings, including EQ and volume, continue
to affect the sound.
3. Edit as desired.
4. Write your edits.
For more information, see “Saving your edits” on page 34
(for Programs), “Saving your edits” on page 70 (for
Combinations), or “Saving your Song” on page 109.
5. Press the MODE button to return to the Set List.
SET LIST mode will be as you left it, with the same Set
List and Slot selected.
To Next Page
Loading...
Need help?
General
