Kramer KDS-8-MNGR User Manual

Kramer Electronics Ltd.
KDS-8-MNGR – Using Embedded Web Pages
20
• HDMI Audio Receiver area, which includes drag-and-drop buttons for all the decoder
displays that are detected by the system, and a Stop button to stop one or all audio
streams from being displayed.
The HDMI Audio page enables performing the following actions:
• Streaming an HDMI Audio Source to a Single Decoder on page 20.
• Streaming an HDMI Audio Source to Multiple Decoders on page 21.
• Stopping an HDMI Audio Source Stream on page 21.
• Stopping an HDMI Audio Display Stream on page 21.
Streaming an HDMI Audio Source to a Single Decoder
To route an HDMI audio source (on a detected encoder) to a display on an encoder:
1. In the Menu tabs, select Monitor & Control. The Video page appears.
2. Click HDMI Audio. The HDMI Audio page appears.
Figure 14: Monitor & Control Tab – HDMI Audio Page
3. Click and drag a source button in the transmitter area to the preferred display in the
receiver area.
4. Release the mouse button.
The routed source name appears below the display name.
The selected source and routed displays change their color.
You can also drag and drop display decoders to an encoder source on the transmitter side to
activate a new streaming route.
The source on the encoder is streamed to the decoder.

Kramer KDS-8-MNGR Specifications

General

Brand	Kramer
Model	KDS-8-MNGR
Category	Server
Language	English