Kramer KDS-8-MNGR User Manual

Kramer Electronics Ltd.
KDS-8-MNGR – Using Embedded Web Pages
22
Routing Analog Audio
You can route analog audio signals via drag-and-drop of the detected encoders and
decoders.
Bitstream audio is supported when the decoder HDMI audio device is set to “HDMI Audio
(Follow Video in Genlock Mode)”.
The Analog Audio page includes two main areas. the:
• Analog Audio Transmitter area, which includes drag-and-drop buttons for all the
encoder sources that are detected by the system, and a multi-option stop button to stop
video transmission.
• Analog Audio Receiver area, which includes drag-and-drop buttons for all the decoder
displays that are detected by the system, and a Stop button to stop one or all audio
streams from being displayed.
If a selected audio source for an analog output is set to “HDMI Audio (Stereo Downmix)” that
output will be marked with an exclamation mark (!) and the audio output will mirror the source
set on the HDMI Audio routing page.
The Analog Audio page enables performing the following actions:
• Streaming an Analog Audio Source to a Single Decoder on page 23.
• Streaming an Analog Audio Source to Multiple Decoders on page 23.
• Stopping an Analog Audio Source Stream on page 24.
• Stopping an HDMI Audio Display Stream on page 24.

Kramer KDS-8-MNGR Specifications

General

Brand	Kramer
Model	KDS-8-MNGR
Category	Server
Language	English