Kramer SL-280 - Page 54

Kramer Electronics Ltd.
SL-280 – Protocol 3000
52
IR-SND
Functions
Permission
Transparency
Set:
IR-SND
End User
Public
Get:
-
-
-
Description
Syntax
Set:
Send IR command to
port
#IR-SND␠PortNum,Cmd_id,CmdName,Repeat,
TotalPackets,PacketNum,<pronto command…>
␍
Get:
-
-
Response
~nn@
IR-SND␠
PortNum,Cmd_id,CmdName,Status
␍␊
Parameters
PortNum – IR port transmitting the command: 1–8, * (broadcast to all ports)
Cmd_id – command ID, numeric string of up to 9 digits for flow control and response commands from
device
CmdName – command name, string of up to 15 alpha-numeric characters
Repeat – number of times the IR repeat command is transmitted 1 (default) – 50 (repeats > 50 are
truncated to 50)
TotalPackets – number of messages the original command was divided into, default = 1
PacketNum – chunk serial number (only valid when Total_packets > 1), PacketNum must be <=
TotalPackets.
Pronto command – Pronto format command (in HEX format, no leading zeros, no ‘0x’ prefix, values must
be separated by commas)
Status –
0 (
no error)
Response Triggers
Notes
Example
Transmit IR Power button command with ID of 25 and name PowerTog from port 1; command is repeated 1
time, the total packets is 1,packet/chunk serial number is 1:
#IR-SND
1,25,PowerTog,1,1,1,0000,006e,0022,0002,0156,00ae,0016,0016,0016,0041,0016,0016
,0016,0041,0016,0016,0016,0016,0016,0016,0016,0016,0016,0016,0016,0041,0016,001
6,0016,0041,0016,0016,0016,0016,0016,0016,0016,0016,0016,0016,0016,0041,0016,00
16,0016,0041,0016,0016,0016,0016,0016,0016,0016,0016,0016,0041,0016,0016,0016,0
041,0016,0016,0016,0041,0016,0041,0016,0041,0016,0041,0016,069c,0156,0057,0016,
0e56
<CR>