▪ Join through Browser – Enables users that are sitting in the meeting room to join the
VIA meeting from a web browser, without downloading any software. (default = ON)
▪ Run VIA – Enables user to run the VIA application without downloading any software.
(default = ON)
▪ Install VIA – Enables user to install VIA client software on device. (default = ON)
• Miracast Settings – Enables a maximum of 2 users to mirror their device screens using
the native Miracast feature on their Windows 10 laptop or Android device without using
the VIA app. (default = OFF)
If you are using the built-in Wi-Fi for Client or AP mode, a VIAcast dongle
(purchased separately) is needed to provide Miracast mirroring for meeting
participants. For more information see: www.kramerav.com/product/VIAcast.
Figure 41: Miracast Setting Tab
▪ Web admin can select as follows:
▪ 1 Presenter – For a single presenter using Wifi Direct. (Default = ON).
▪ 2 Presenter – For two presenters using local network.
• Reset Session – Enables all users to reset the current VIA session from an icon that
appears in the VIA tray menu. (default = ON)
• Default Encoding for Presentation – PC & Mac clients connected to the VIA gateway
default to the encoding method selected here. (default = Auto/H264)
• Show Username – Shows the presenter’s username while presenting. (default = ON)
• Auto DND – The DND (Do Not Disturb) feature allows only the active presenter to
present and prevents all other participants from presenting. Auto DND activates DND
when a user starts presenting from their device (default = OFF).
Figure 42: DND Setting Tab
• Do Not Disturb – After clicking Present button, the full screen presenter can enable or
disable DND. (default = OFF)
• Presentation Always in full Screen – Only one user at a time can present. When a new
presentation is started, the current presentation stops. (default = OFF)
To Next Page
Loading...