VIA GO² – For Web Administrator: Configuring Settings – Gateway Management Pages
5. Select one of the following participation levels:
These options are enabled only when Moderator Mode is enabled (see Moderator
Mode on page 41).
• Moderator – User is able to become a moderator and has access to moderator features
(see Becoming Meeting Moderator on page 79).
• Participant – User can join a meeting as a participant but cannot access moderator
features.
6. Click Save.
A new user is added, and the User List tab appears with the new user added to the list.
Managing Network Settings
VIA GO² enables you to do the following:
• Changing Device IP Address on page 15.
• Setting Up Secure Wireless Guest Access Point on page 16.
• Connecting VIA GO² to Network Wirelessly on page 17.
• Connecting VIA GO² to 802.1x Network on page 19.
• Uploading an SSL Certificate (see Certificate on page 46).
Changing Device IP Address
The default IP setting is DHCP that assigns an automatic IP address to your VIA GO² device.
This enables easy plug and play setup when connecting your VIA GO² to the network. The
following explains how to change a static IP address.
When changing these settings, please contact your IT administrator. Incorrect values can
cause a loss of communication.
To change the IP address of your VIA GO² unit:
1. Click Device Management > Network Settings.
The LAN setting tab in the Network Settings page opens.
2. Under Connection Type, select Static.
3. Under Network Information, rename the Gateway IP.
4. Click Apply.
The IP address of your VIA GO² unit is changed.
To Next Page
Loading...
Need help?
General