Kramer VIA GO2 User Manual

Kramer Electronics Ltd.
VIA GO² – For Web Administrator: Configuring Settings – Gateway Management Pages
16
Setting Up Secure Wireless Guest Access Point
Using the built-in Wi-Fi module, VIA GO² enables you to set up a secure access point for
users to connect to your VIA GO² network. This setup is ideal for guest users whom you may
not want to connect directly to your network.
Figure 11: LAN Setting Page
To set up a secure wireless guest access point:
1. Click Device Management > Network Settings.
The Network Settings page appears.
2. Click WiFi.
The WiFi tab appears.
Figure 12: WiFi setting Tab
3. Click the Switch On or Off Wifi switch.
The switch turns green, and the WiFi settings appear.

Kramer VIA GO2 Specifications

General

Brand	Kramer
Model	VIA GO2
Category	Conference System
Language	English