VIA GO² – For Web Administrator: Configuring Settings – Gateway Management Pages
Creating Scrolling Text
To create scrolling text:
1. On the Manage Content page, click Add Content.
The Add Content pane appears with the Scroller tab open.
Figure 56: Scrolling Text Setting Tab
2. Type the text to be displayed in the box.
3. Type a name for the scroller in the Scroll Name text box.
4. Set the scroll speed.
Select Zero for speed to create a static text display that does not scroll.
5. Set the font parameters.
To add a font, click Upload Font or (see Adding Fonts to Digital Signage on page 60) .
The following variables can be entered into the text field:
• #airplayname# – Displays the airplay name.
• #roomname# – Displays the room name/code for joining into the meeting.
• #appass# – Displays the Access Point password.
• #apname# – Displays the Access Point name.
• #ipaddress1# –Displays the IP address for the primary network.
• #ipaddress2# – Displays the IP address for the second network, if in use.
6. Set the background color.
7. Click Create.
The Scroller is created and added to the Existing Media table.
To Next Page
Loading...