Kramer VS-411XS - Page 41

Kramer Electronics Ltd.
VS-211XS, VS-411XS – Using Embedded Web Pages
39
To copy an EDID from an output / input to an input:
1. In the Navigation pane, click EDID Management.
2. Select the EDID source (for example, the output).
If you are reading EDID from an output, make sure that that output is connected to
an acceptor.
3. Select one or more inputs.
Figure 37: EDID Management Page – Copying EDID from the Output
4. Click COPY.
The EDID is copied to the selected inputs.