IV - 2
Comfort Controls
4.3 Mounting
Attach the control box on the tractor in a place where it is
clearly visible to the driver.
Connect the comfort controls to the on-board computer:
•
Plug the control cable (1) into the control box (3) socket (2).
• Secure the connection using the union nut (4).
• Connect the power supply cable (12 V) for the comfort
controls to the 3-pin power outlet on the tractor (DIN
9680). See Chapter 3.4.2 Electric Supply.
Place and secure the connecting cables
between the tractor and the round
baler in such a way that they do not
tense during turning or come into
contact with the tractor wheels.
BP-VFS-010
To Next Page
Loading...
