IV - 8
Comfort Controls
4.6.4 Information
Information relating to the ram strokes per pack and per
minute can be called up by pressing button .
The following message appears in the display:
Lifts/Bale:.....0040
Lifts/min:......0042
4.6.3 Bale Counter
The
on-board
computer
on
the
big
pack
baler
is
equipped
with an integral bale counter. When button
4
is
pressed the following message appears in the display:
Bales pie.:.....1723
Bales tot.:.....2693
pie.-- clear- --tot.
The current number of big packs is shown in the upper
line. The lower line indicates the total number of packs
produced up to that point. Both counters are indepen-
dent of each other and each can be reset witout
influencing the other.
BALES CURRENT-reset press button
BALES TOTAL-reset press button
Switch back to the bale display using button
1
or
2
.
Prog Quit
#
12 90
34
BP-VFS-075
Ballen Stueck: 1723
Ballen G-Stueck:2693
St--- loeschen --Gst
5
6
87
P
max
Prog Quit
#
12 90
34
BP-VFS-078
Huebe/Ballen:...0040
Huebe/Min:......0042
5
6
87
P
max
To Next Page
Loading...
