Krone Big Pack 127 / MultiCut - Page 51

V - 5
Working with the Big Pack Baler
5.4.2 Inserting the Twine
The knotter shaft must be secured every time new twine
is inserted, so that the needle yoke cannot move. To do
this move the safety lever (1) from position (a) to posit-
ion (b) and rest on shaft (2).
BP380-7-044
1
2
2
1
a
b
a
b
Tandem Axle
With the tandem axle the mudguard must be swung out
of the way to be able to feed the twine into the twine
brake. To do this turn the lock (1) upwards and swing
the mudguard (2) out of the way.
BP-VFS-015