VIII - 2
Lubrication
Knotter shaft support bearings central lubrication
Knotter gear lever shaft left central lubrication
Needle yoke right and left central lubrication
Knotter central lubrication
toothing of the knotter apply grease or viscous oil
toothing inside the knotter drive gear apply grease or viscous oil
Multi Cut drive diagonal shaft 5
Gearbox cutting rotor dumb-bell shaft 2
Star-shaped ratchet 1
Bearings for the brake lever adjustment on
individual axle right and left 2
Brake shaft right and left 2
Tandem axle: Brake lever bearings (right / left) 4
Brake shaft bearings (right / left) 4
Axle rocker arm (right / left) 2
Relieve the bearing when lubricating
Bowden cable (right / left) 2
PTO shaft: Main drive 6
Pick up drive (low maintenance, 1/ year) 5
Knotter drive (low maintenance, 1/ year) 3
Lubrication Points No. of Lubricating Nipples
Crank pin for bale ram drive right and left 2
Piston piin for baling ram drive right and left 2
Bearing rollers on ram right and left 4
Guide rollers on conveyor and feeder rakes 12
Cam track pick up right 1
Feeler wheels 2
Jack stand 1
Parking brake 1
Lubrication Points
In the following table lists the most lubrication points on the big pack baler, as well as the number of lubricating
nipples.
¹
To Next Page
Loading...
